A reliable, high-performance Layer 2 smart switch designed for small to mid-sized business networks, offering PoE support, advanced traffic control, and simplified management.
Specification
- Series: Cisco 220 Series
- Device Type: Managed Switch – 26 Ports
- Form Factor: Desktop or Rack-Mountable (1U)
- Enclosure Type: Metal
- Localization: Europe
Port Configuration
- Total Ports: 26
- 24 x 10/100/1000 Mbps Ethernet (PoE)
- 2 x Combo Gigabit RJ45/SFP Uplink Ports
- PoE Support: Yes (IEEE 802.3af)
- PoE Budget: 180W total
- Interfaces:
- 24 x 1000Base-T RJ-45 (PoE) – 15.4W each
- 2 x 1000Base-T RJ-45
- 2 x 1000Base-X SFP
Performance
- Switching Capacity: 52 Gbps
- Forwarding Rate (64-byte packets): 38.69 Mpps
- MAC Address Table Size: 8,192 entries
- RAM: 128 MB
- Flash Memory: 32 MB
- MTBF: 343,684 hours
Management & Protocols
- Remote Management: SNMP v1, v2c, v3, RMON (1, 2, 3, 9), HTTP, Telnet, CLI
- Authentication: RADIUS, TACACS+
- Management Interface: Web GUI and CLI
Networking Features
- Layer Support: Layer 2
- Supported Standards:
IEEE 802.3, 802.3u, 802.3z, 802.1D, 802.1Q, 802.3ab, 802.1p, 802.3af, 802.3x, 802.3ad (LACP), 802.1w, 802.1x, 802.1s - Key Features:
- VLAN and QoS
- Port Mirroring
- Link Aggregation (LACP)
- Spanning Tree Protocols (STP, RSTP, MSTP)
- DHCP and BOOTP Support
- IGMP/MLD Snooping
- Flow Control and Storm Control (Broadcast, Multicast, Unicast)
- Access Control Lists (ACLs)
- DoS Prevention
- Firmware Upgradable
- SNTP, TFTP, LLDP Support
- Reset Button
Power & Environmental
- Power Supply: Internal
- Input Voltage: AC 100–240V (50/60 Hz)
- Maximum Power Consumption: 180W
- Operating Temperature: 0°C to 50°C
- Storage Temperature: -20°C to 70°C
- Humidity (Operating/Storage): 10%–90% (non-condensing)
Dimensions & Weight
- Width: 44 cm
- Depth: 25 cm
- Height: 4.4 cm
- Weight: 3.7 kg
Compliance & Certifications
- Compliant Standards:
UL 60950, C-Tick, FCC CFR47 Part 15, CSA 22.2 - LED Indicators: Port speed, system, PoE status, link/activity
