Description
This client bridge can connect up to 15 Ethernet client devices running a legacy networking protocol to the WLAN, extending wireless network access to a wide range of protocols.
An integrated serial to TCP/IP converter allows an RS-232 asynchronous terminal device to communicate over the network, enabling wireless mobility for electronic cash registers, scales, servers, printers, medical equipment, and other similar devices.
Hardware-accelerated encryption enhances performance when using WPA2/AES security.
I/O Ports and Slots
- 1 RJ-45 autosensing 10/100/1000 port; Duplex: 10BASE-T/100BASE-TX (half/full), 1000BASE-T (full only)
- Standards: IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T
- 1 RS-232C serial console port
Characteristics
- Radios (built-in): 802.11 a/b/g/n/ac
- Radio operation modes: Client bridge
- Wi-Fi Certification: a/b/g/n/ac Wi-Fi Certified
- Antenna connectors: Three RP-SMA
- Antenna type: 2dBi dual-band omnidirectional
- External antennas: 3
- Data rate: Three spatial streams for up to 1.3 Gbps PHY rate
- Note: When using outdoor antennas, customer must supply RP-SMA to Type N adapter
Physical Characteristics
- Dimensions: 5.5 (W) x 1.3 (D) x 5.0 (H) in (13.97 x 3.3 x 12.7 cm)
- Weight: 2.01 lb (0.91 kg)
Environmental
- Operating temperature: 32°F to 122°F (0°C to 50°C)
- Operating relative humidity: 5% to 95%, noncondensing
- Storage temperature: -40°F to 158°F (-40°C to 70°C)
- Storage relative humidity: 5% to 95%, noncondensing
- Shock and vibration: EN 61373
- Altitude: Up to 10,000 feet (3,048 meters)
